• All hardware included
• Ovenbaked high gloss finish in White or Black
• Compact slips together
• Installs in seconds
• Available in 52" and 64" high.
• Printed substrates not included.

!!!!!ALL ORDERS THAT ARE SHIPPING OUT OF CALIFORNIA FOR THE 64" SIZE WILL GO BY TRUCK ONLY...SO THERE WILL BE ADDITIONAL FREIGHT CHARGES !!!!!!

For additional Name Rider Holders click here

For Colonial & Coldwell Banker Frames

• 52" & 64" Colonial Frame
• All hardware included
• Ovenbaked high gloss white finish
• Compact slips together
• Installs in seconds
• Printed substrates not included.

For additional Name Rider Holders click here

Real Estate Stakes with T-Bar and Flag Pole Cup Holder

48" Tall, available in black & white

• 36" arm or 48" arm
• 4" x 4" vertical post
• 72" tall
• Colonial style cap
• Includes Metal Anchor
• Printed substrates not included

Additional Metal Anchors can be purchased here

Metal Anchor for Real Estate Post

"U" - CHANNEL POST

• 6', 8', 10' or 12' 
• Galvanized heavy duty steel
• Tapered on one end

—————————►    There is special handling when shipping 10' & 12' posts (Must ship ground freight)

Plate Holder for U Channel Post. Includes:
• Nut
• 3” bolt
• .080” gauge
• Metal washer
• Plastic washer
• Aluminum plate 3” x 3”

Constructed of non-rust aluminum post, include heavy duty ground stake and all hardware required for assembly.

• 2" x 3" vertical post
• 64" tall post with 41" long arm length
• Can accommodate 30" wide sign and rider
• Rider is attached with thumb screws and holes are not required
• Electrostatic powder coated in black or white
• Includes heavy duty stake

Printed substrate Not included 

2" x2"x10 ft. long Square Posts, 12 gauge Steel square tube. 7/16" holes on center on all four sides. Post finish is hot dipped in galvanized zinc coating and finished with conversion coating and clear top coat.

• 12 Gauge steel
• 2” x 2” x 10’ long
• Coated for rust resistance
• 7/16” holes punched on all sides

2" x2"x30" long heavy duty Square Steel Sleeve, 12 gauge Steel square tube. 7/16" holes on center on all four sides. Post finish is hot dipped in galvanized zinc coating and finished with conversion coating and clear top coat.

• 12 Gauge steel
• 2” x 2” x 30" long
• Coated for rust resistance
• 7/16” holes punched on all sides
• Use with square steel post

6"x6" plate x6.25" tall Surface Mount Sign Post Bracket, 12 gauge Steel square tube. 7/16" holes on center on all four sides of post. Post finish is hot dipped in galvanized zinc coating and finished with conversion coating and clear top coat.

• 12 Gauge steel
• Coated for rust resistance
• 7/16” holes punched on all sides